Attention: Guests by accessing CRO, you agree to the site terms. Please read the terms of CRO Click Here

Author Topic: United Late Models of Ontario  (Read 19554 times)

0 Members and 1 Guest are viewing this topic.

Offline MARCH

  • Team Owner
  • *****
  • Posts: 183
  • LATE MODEL DELAWARE #95
Re: United Late Models of Ontario
« Reply #30 on: December 13, 2014, 02:26:46 AM »
All we need now are the rules...which combo 602,603 or 604 will have the advantage????
Well it's not the 602 I think it said 50 lb break
Did they forget cast 602 heads weights almost 70 lbs more
Then 604 heads??that cast head sits 3 ft off
 the ground oh well that weight couldn't be in a worse place

that being  Said this is a good thing for late model racing just not good for all like myself
My plan is too support delly for 5 races the other 2 apc races we shall see



Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112805#msg112805

CanadianRacingOnline.com

Re: United Late Models of Ontario
« Reply #30 on: December 13, 2014, 02:26:46 AM »

Offline MarkDilley

  • Team Owner
  • *****
  • Posts: 190
Re: United Late Models of Ontario
« Reply #31 on: December 13, 2014, 12:46:57 PM »
I just read rules on APC web and it says 75lb weight break at Sunset Sauble and Flamboro and 150 lb weight break at Delaware am I reading that wrong

Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112806#msg112806

Offline MARCH

  • Team Owner
  • *****
  • Posts: 183
  • LATE MODEL DELAWARE #95
Re: United Late Models of Ontario
« Reply #32 on: December 13, 2014, 06:00:12 PM »
Nope I read it wrong but more then  What u listed is not enough
Of a weight break for my non rebuilt. 602 as it came from the dealer maybe
A stefco rebuild would make it closer but then again most of the 604 have been
Rebuilt so the way I see it is I have to buy a new 604 and have it stefco sealed so
10,000 before I hit the track
So I won't be there  good luck guys

Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112807#msg112807

CanadianRacingOnline.com

Re: United Late Models of Ontario
« Reply #32 on: December 13, 2014, 06:00:12 PM »

Offline murray

  • Series Owner
  • *****
  • Posts: 256
Re: United Late Models of Ontario
« Reply #33 on: December 14, 2014, 02:53:22 PM »
Just go over whw michigan...should be able to find a nice 383 chev  short block for $ 1500...when was the last timd you seen a track check stroke ??.

Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112810#msg112810

Offline raceready

  • Pit Crew
  • **
  • Posts: 21
Re: United Late Models of Ontario
« Reply #34 on: December 17, 2014, 08:13:39 PM »
Question regarding rim/tire combination.
I note 15" x 10" rim

8" or 10" tire width?

Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112815#msg112815

Offline MarkDilley

  • Team Owner
  • *****
  • Posts: 190
Re: United Late Models of Ontario
« Reply #35 on: December 18, 2014, 08:36:10 AM »

Offline raceready

  • Pit Crew
  • **
  • Posts: 21
Re: United Late Models of Ontario
« Reply #36 on: December 19, 2014, 05:58:49 PM »
Thanks Mark.

So guys who have been running with ACT rules will definitely be at a disadvantage.  Looks to me that the Delaware Boys will be at the front of the pack. 

Am I missing something here?

Linkback: https://www.canadianracingonline.com/smf/index.php?topic=20459.msg112821#msg112821

 


HTML ezBlock

site
stats
Powered by EzPortal