CanadianRacingOnline.com

Canadian Oval / Road Racing => Canadian Racing Forums => Stock Car General => Topic started by: polishprince12 on October 12, 2012, 09:43:42 AM

Title: Floater rearend
Post by: polishprince12 on October 12, 2012, 09:43:42 AM

i have a gm gbody metric chassis with stock lowers and #2 spindles with the big rotors. does anybody know the proper width rearend to put in the car, flange to flange? i want to order the proper rearend, mine is currently 58" and is way too narrow! thanks for the help!

Title: Re: Floater rearend
Post by: JimmyThunder on October 12, 2012, 11:06:47 AM

when I ran super street I had the rear width an inch narrower than the front . Think it was 63in?

Title: Re: Floater rearend
Post by: dodgeguy14 on October 12, 2012, 10:31:08 PM

G body is 59" hub face to hub face on the front stock, lengthened lower on the front puts you at 60". I'd say 58.5 or 59" would be ideal. Don't forget to line up your right side tires with each other. They have to track in line.